FORMULA DRIFT PRO 2 ORLANDO,FL 2019 – ROUND 1
Kelsey’s drifting for April 2019
April was an exceptionally busy month as it included a round trip from Florida to California to have the car wrapped in its new incredible livery and to attend the Voodoo Ride Bash. During the bash the new livery was revealed as was our new title sponsor, Voodoo Ride. Voodoo Ride develops extraordinary car cleaning products that work and we are proud to be working with Voodoo Ride. Be sure the check them out.
After all the activity it was very quickly time for the 2019 season of Formula Drift Pro2 to begin. Here, Kelsey summarizes the event:
2019 Formula Drift Pro 2 Round One – Orlando
Team Drift Chick was feeling very confident going into the 2019 Formula Drift Pro 2 season. Round one would be hosted by our home track, Orlando Speedworld, so we were in comfortable territory. Unfortunately, our confidence was short lived.
Due to some power steering pump issues plaguing us since we built the car, we have been making small changes to our system in hopes of alleviating the issues. We thought we had found a solution in a new brand of pump, but our excitement only lasted a few months when it also failed. We decided to give that brand of pump another try since it had lasted the longest without issues so far, and we couldn’t rule out the possibility of leftover metal bits from other pumps causing its failure. Because of this, we decided to replace everything in the system to brand new parts so we could rule that out as a possible culprit for the failure.
I drove 60 laps on that pump at the Import Alliance Atlanta demo issues with no power steering issues. We were relieved and hopeful it would hold up. We traveled out to California for the wrapping and reveal of our new 2019 livery, as well as to announce our new title partner, Voodoo Ride. At their Voodoo Ride bash event, I noticed my power steering stiffening at points and my heart sunk. We found metal “specks” in the power steering fluid reservoir, and I immediately knew we were back to where we started with only a couple weeks before round one in Orlando.
At this point, we constructed a plan for preventative maintenance. We would always have three pumps in circulation; One was on the car, while we had one with us as a spare, and another being rebuilt or as a second spare. Knowing that two of these pumps lasted at least 60 laps before failing, I was confident we could use this system, and start with a fresh pump for each competition, to get through the season so we can find a more permanent solution in the off-season when there is more time.
We installed a brand new pump and planned to test the Saturday just before Thursday qualifying. In our first bit of bad luck, I was stepped on by a horse Friday and sustained a lot of injuries around my heel and ankle, leaving me unable to walk, let alone drive a drift car. Everything on the car, besides the power steering pump, was the same as usual, so I didn’t think that missing testing would really hurt us since we have had longer life out of these pumps than any before. I was very familiar with the track and I felt ready.
This is where things went very wrong for us. Being comfortable with the track, I decided to go all in for the first lap of practice. I put the car on a very high line around the bank of the first turn. Everything was feeling great until half to three-quarters of the way around the bank. My power steering cut out and tried to rip the wheel from my hands. I tried to save it, but I was already so close to the wall that there was little I could do to avoid a collision.
The damage was fairly extensive. All of the suspension on the driver’s side was broken, and the front strut tower was pushed in. The car would need a frame machine to be repaired safely, and qualifying was that evening.
Because of the time crunch, and because the wreck happened in our first “open practice” session and not our first “official practice” session, we decided we had a better chance of getting back on track if we switched to a different car instead of fixing the wrecked car for this round.
Our SR22 powered S14 demo car was sitting at home with the valve cover off and no cams, in the middle of a repair from its most recent double rocker arm failure on cylinder three. However, we knew it would be faster to get it running than it would find a body shop willing to take us in last minute. Crew Chief Dan and Tom drove the 45 minutes home to get the SR car running, while Daniel M. stayed behind to get new suspension parts on the Ford-powered FD car to get it at least rolling again.
The SR car arrived at the track at the same time I returned with some last minute decals cut by Tahir of Guardian Wraps (We have a brand new wrap planned for the demo car, but due to unfortunate circumstances it continues to be put on hold). We unloaded the car during our second practice session, but it was running very rough. With the help of Andrew DiMartino from Haltech, we got to work trying to set the timing and diagnose any issues. As time went on, we were moving from one possibility to another as to why the car wouldn’t run right. We checked and swapped spark plugs, checked grounds, checked fuel injectors, and we even checked compression. It came down to our second qualifying run and last chance to qualify. I hadn’t driven a full lap all day, but I decided that even if the engine was hurt if I thought I could get around that track, I would make it take one lap.
After calling for a competition time out to get out there at the last possible second, I pull up to the track in the demo car, sporting the brand new Voodoo Ride decals. As I’m doing so, the engine drops a cylinder. I’m devastated. I pull into the burn out box hoping for a miracle and to at least show in front of our fans. I do a few donuts but the engine continues to sound worse and worse.
At this point, I did not think the car would make it around the bank safely and it would just be a risk to the car, and myself, if I were to try. I signaled to the officials that I was calling it quits and exited the track.
Although we were unable to make a qualifying lap, I know that the team and I did everything we could to rally after such an unexpected and untimely failure. Fortunately, the support system and web of fans have been overwhelming, and they led us to Billy Mitchell, of Sanford Paint and Body. He had us on a frame machine Monday evening after business hours and stayed late to help us pull everything out in one night.
While we don’t have time to address our power steering issue before the next round, we do have some new ideas and adjustments to make on our current system. We have parts on the way and plan to make the changes as soon as we return home. In the meantime, if we experience another power steering pump failure at Road Atlanta, we are hoping our power steering preventative maintenance plan be more successful since the walls are further away and harder to hit there! We stay in good spirits and are looking for redemption in Atlanta!
As always, we will continue to get out there to compete hard and to constantly learn and improve.
All the best to each of you!
Kelsey (aka Drift Chick) and Dan Rowlings
www.driftchick.com
www.facebook.com/KelseyRowlings
https://www.instagram.com/kelseyrowlings/
Kelsey is running Konig Hypergrams in 17×9 et 25mm front and 18×9.5 et 25mm rear. The Konig Hypergram is Flow Formed.
