Taking on Utah Motorsports campus track!!! Ft. Alec Robbins (FD)

Formula Drift Utah has passed and the season is coming towards an end. It has been a great season for all of our drivers so far and everyone hopes to end it on a high note. Each driver and their teams run into their fair share of problems along the way and need to make adjustments on the fly. Here is a little peak at what these drivers and their teams go through to be successful.

A season update from our FD pro driver Alec Robbins: “It’s been a hard fought few weeks for the team!  After a great weekend at Gridlife Alpine Horizon festival we found an oil leak while doing general maintenance on the car.  We replaced the leaking seal and got the car prepped for a new round of FD at Utah Motorsports Complex.  Being a new track practice was pretty crucial,  however after just two runs we noticed our new oil seal was again starting to leak.  Because the seal is not an easy one to replace we decided to do two more runs then cut our practice short to save the car for qualifying.  The car however had different plans and on our 3rd run the seal blew completely out spraying oil on the hot exhaust and catching fire.  Luckily the fire was contained under the car and went out before I even noticed anything had happened.  We got the car back to the pit and got to work, pulling the transmission, clutch, bell housing, ect. in order to get to the rear main seal and get it replaced before qualifying started.  We finished the job and got up to the line no more than 5 mins before our qualifying run!  I got my thoughts together and went out for my first pass,  I got a little too aggressive and overshot the 2nd outside zone which put my rear tires in the dirt and messed up my line for the remainder of the run.  We got a chance at a second run and I was able to put it together and get a score high enough to get us into competition.  However our engine again started leaking.  We had all day Friday to get the seal replaced once again, however after some compression and leak down testing it was clear our motor was getting worn and showing signs of worn piston rings or cylinder damage.  In order to get through competition the team came up with an ingenuitive plan to mount a vacuum in the car attached to the valve cover to attempt to suck excess pressure from the crankcase.  The plan worked and I was able to get two practice runs before competition started.  We still had our work cut out for us, going against 2 time champion Fredric Aasbo in top 32.  The Engine was starting to misfire on run up but I stayed on throttle and was able to put down a pretty solid chase run behind Fredric.  This was only my second chase run I had all weekend.  In my lead I was able to drive one of my best laps of the weekend.  The car pushed wide on the last outside zone when the tires wore out, putting me two tires off. however it was still a great showing after pushing through all of our issues.  Fredric was able to take the win,  but it still felt like a win for me and the team.  We have a Fresh Motor going into the car for the final round in just about 1 month!”

Alec, congratulations to you and your team on a great season so far. We wish you the best of luck at Irwindale. Cheers.

The Best Wheels For A Tesla Model 3

It may be difficult to make your EV sound mean and aggressive, but it is easier to make your EV look mean and aggressive. Two of our friends Chris (yellow Model 3) and Kehn (white Model 3) have brought their electric builds to the next level. Both of these cars a running the Konig Countergram in Hyper Chrome w/ Mirror Machined Lip 19×10 B profile with a ET25 offset. The concavity and shine from the chrome really compliments the sleek vent-less design of the Model 3. Along with some other cosmetic and suspension mods these vehicles are green and still look bad ass! If you have a Model 3 and want take your car to the next level, a set of Countergrams might be what you’re looking for.
Chris’s Instagram: ► @menacem3p
Kehn’s Instagram: ► @hellokehn

Wide Widths Available

As we continue to support motorsports, the demand for additional sizes is ongoing. We listen to demand and are always willing to incorporate new sizes if appropriate. We now have a 18×12 option in the Konig Heliogram. Both Titanium Metallic and Matte Bronze come in 18×12.

Steve Anstey, Vinny Ten Racing
James Houghton, Time Attack

In addition to our 18×12 option we also have several options in 11″. The Hypergram, Countergram, and Ampliform are all available in 11″ width.

BTW PODCAST – #WHEELWEDNESDAY – UPDATE: Wheels, Giveaways, Motorsports!

In this week’s Behind The Wheel “Wheel Wednesday” podcast, Scott (Konig Wheels , Marketing Director), Nick (Konig Wheels, Marketing team) give you some UPDATES!!! As we continue on with the social distancing we’ve started to notice some events get back into the swing of things and put expected schedules for the remainder of the year. In this week’s Wheel Wednesday Podcast we talk one of these events as well as some updates on our new wheels and a Wheel Giveaway!?!? Thank you for your support and for listening/watching!

We hope you enjoy the podcast! If you like what you hear, let us know! We’d love some feedback. Let us know what else you’d like us to talk about for the next upcoming segments of Wheel Wednesday!

The full audio version is live on iTunes, Google Play and Stitcher right now!

If you like what we are doing here, please subscribe! We’re on iTunes, Google Play and of course, the full video version of every episode is on YouTube! Thank you!

Wheel Offset podcast

You can also, subscribe or download the podcast on our website, iTunes, Google Play, Youtube & Stitcher:

itunes google play youtube stitcher

FOLLOW:
Scott Weiss: @scott_konig
https://www.instagram.com/scott_konig/


Nick Pedroza: @nick_pedroza_
https://www.instagram.com/nick_pedroza_/

BTW PODCAST – #WHEELWEDNESDAY – Konig Countergram

In this week’s Behind The Wheel “Wheel Wednesday” podcast Scott (Konig Wheels , Marketing Director) and Nick (Konig Wheels, Marketing team) go in depth on the new Konig Countergram. They talk about available sizing, bolt patterns, offset and more! Thank you for your support and for listening/watching!

For more info on the NEW! Konig Countergram:
Konig Countergram

We hope you enjoy the podcast! If you like what you hear, let us know! We’d love some feedback. Let us know what else you’d like us to talk about for the next upcoming segments of Wheel Wednesday!

The full audio version is live on iTunes, Google Play and Stitcher right now!

If you like what we are doing here, please subscribe! We’re on iTunes, Google Play and of course, the full video version of every episode is on YouTube! Thank you!

Wheel Offset podcast

You can also, subscribe or download the podcast on our website, iTunes, Google Play, Youtube & Stitcher:

itunes google play youtube stitcher

FOLLOW:
Scott Weiss: @scott_konig
https://www.instagram.com/scott_konig/


Nick Pedroza: @nick_pedroza_
https://www.instagram.com/nick_pedroza_/

Countergram

Konig Part#SizePCDOffset (mm)FinishCenter BoreConstructionMax Load (lbs)Net Weight (lb) - PROJECTION
CT7510035515x7.54X10035MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED110012.13
CT7510035C15x7.54X10035HYPER CHROME / MACHINED LIP73.1FLOW FORMED110012.13
CT8510025515x84X10025MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED121212.79
CT8510025C15x84X10025HYPER CHROME / MACHINED LIP73.1FLOW FORMED121212.79
CT9510035515x94X10035MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED121213.45
CT9510035C15x94X10035HYPER CHROME / MACHINED LIP73.1FLOW FORMED121213.45
CT8710045517X84X10045MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED126717.42
CT8710045C17X84X10045HYPER CHROME / MACHINED LIP73.1FLOW FORMED126717.42
CT8751040517X85X10040MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154317.42
CT8751040C17X85X10040HYPER CHROME / MACHINED LIP73.1FLOW FORMED154317.42
CT8751438517X85x114.338MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154317.42
CT8751438C17X85x114.338HYPER CHROME / MACHINED LIP73.1FLOW FORMED154317.42
CT8752035517x85x12035MATTE BLACK / MATTE MACHINED LIP72.6FLOW FORMED154317.42
CT8752035C17x85x12035HYPER CHROME / MACHINED LIP72.6FLOW FORMED154317.42
CT9751425517x95x114.325MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154318.3
CT9751425C17x95x114.325HYPER CHROME / MACHINED LIP73.1FLOW FORMED154318.3
CT9751443517x95x114.343MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154318.3
CT9751443C17x95x114.343HYPER CHROME / MACHINED LIP73.1FLOW FORMED154318.3
CT9752032517x95x12032MATTE BLACK / MATTE MACHINED LIP72.6FLOW FORMED154318.3
CT9752032C17x95x12032HYPER CHROME / MACHINED LIP72.6FLOW FORMED154318.3
CT8850843518X8.55x10843MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154318.69
CT8850843C18X8.55x10843HYPER CHROME / MACHINED LIP73.1FLOW FORMED154318.69
CT8851040518X8.55X10040MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154318.82
CT8851040C18X8.55X10040HYPER CHROME / MACHINED LIP73.1FLOW FORMED154318.82
CT8851243518X8.55x11243MATTE BLACK / MATTE MACHINED LIP66.6FLOW FORMED154318.69
CT8851243C18X8.55x11243HYPER CHROME / MACHINED LIP66.6FLOW FORMED154318.69
CT8851435518X8.55x114.335MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154319.04
CT8851435C18X8.55x114.335HYPER CHROME / MACHINED LIP73.1FLOW FORMED154319.04
CT8851443518X8.55x114.343MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154318.69
CT8851443C18X8.55x114.343HYPER CHROME / MACHINED LIP73.1FLOW FORMED154318.69
CT8852035518X8.55x12035MATTE BLACK / MATTE MACHINED LIP72.6FLOW FORMED154319.04
CT8852035C18X8.55x12035HYPER CHROME / MACHINED LIP72.6FLOW FORMED154319.04
CT9851425518x9.5A5x114.325MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154321.11
CT9851425C18x9.5A5x114.325HYPER CHROME / MACHINED LIP73.1FLOW FORMED154321.11
CT9851435518x9.5A5x114.335MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154320.67
CT9851435C18x9.5A5x114.335HYPER CHROME / MACHINED LIP73.1FLOW FORMED154320.67
CT9852035518x9.5A5x12035MATTE BLACK / MATTE MACHINED LIP72.6FLOW FORMED154320.67
CT9852035C18x9.5A5x12035HYPER CHROME / MACHINED LIP72.6FLOW FORMED154320.67
CT0851420518x10.5B5x114.320MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154320.94
CT0851420C18x10.5B5x114.320HYPER CHROME / MACHINED LIP73.1FLOW FORMED154320.94
CT0852025518x10.5B5x12025MATTE BLACK / MATTE MACHINED LIP72.6FLOW FORMED154320.72
CT0852025C18x10.5B5x12025HYPER CHROME / MACHINED LIP72.6FLOW FORMED154320.72
CT1851415518x11B5x114.315MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154321.91
CT1851415C18x11B5x114.315HYPER CHROME / MACHINED LIP73.1FLOW FORMED154321.91
CT8950843519x8.55x10843MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154322.5
CT8950843C19x8.55x10843HYPER CHROME / MACHINED LIP73.1FLOW FORMED154322.5
CT8951243519x8.55x11243MATTE BLACK / MATTE MACHINED LIP66.6FLOW FORMED154322.5
CT8951243C19x8.55x11243HYPER CHROME / MACHINED LIP66.6FLOW FORMED154322.5
CT8951435519x8.55x114.335MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154322.5
CT8951435C19x8.55x114.335HYPER CHROME / MACHINED LIP73.1FLOW FORMED154322.5
CT8951443519x8.55x114.343MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154322.5
CT8951443C19x8.55x114.343HYPER CHROME / MACHINED LIP73.1FLOW FORMED154322.5
CT9951230519x9.5A5x11230MATTE BLACK / MATTE MACHINED LIP66.6FLOW FORMED154324.7
CT9951230C19x9.5A5x11230HYPER CHROME / MACHINED LIP66.6FLOW FORMED154324.7
CT9951425519x9.5A5x114.325MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154324.7
CT9951425C19x9.5A5x114.325HYPER CHROME / MACHINED LIP73.1FLOW FORMED154324.7
CT9951435519x9.5A5x114.335MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154324.7
CT9951435C19x9.5A5x114.335HYPER CHROME / MACHINED LIP73.1FLOW FORMED154324.7
CT0951425519x10B5x114.325MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154325.9
CT0951425C19x10B5x114.325HYPER CHROME / MACHINED LIP73.1FLOW FORMED154325.9
CT1951240519x11B5x11240MATTE BLACK / MATTE MACHINED LIP66.6FLOW FORMED154322.93
CT1951240C19x11B5x11240HYPER CHROME / MACHINED LIP66.6FLOW FORMED154322.93
CT1951418519x11B5x114.318MATTE BLACK / MATTE MACHINED LIP73.1FLOW FORMED154323.92
CT1951418C19x11B5x114.318HYPER CHROME / MACHINED LIP73.1FLOW FORMED154323.92

BTW PODCAST – #WHEELWEDNESDAY – New Wheels for 2020!

We’re back! In this week’s “Wheel Wednesday” podcast Scott (Konig Wheels , Marketing Director) and Nick (Konig Wheels, Marketing team) talk about the new wheels for 2020, when they are coming and why does it take longer for them to be available during launch years. Thank you for your support and for listening/watching! Let us know what you think.

For more info on NEW! wheel releases: konig2020.com

We hope you enjoy the podcast! If you like what you hear, let us know! We’d love some feedback. Let us know what else you’d like us to talk about for the next upcoming segments of Wheel Wednesday!

The full audio version is live on iTunes, Google Play and Stitcher right now!

If you like what we are doing here, please subscribe! We’re on iTunes, Google Play and of course, the full video version of every episode is on YouTube! Thank you!

Wheel Offset podcast

You can also, subscribe or download the podcast on our website, iTunes, Google Play, Youtube & Stitcher:

itunes google play youtube stitcher

FOLLOW:
Scott Weiss: @scott_konig
https://www.instagram.com/scott_konig/


Nick Pedroza: @nick_pedroza_
https://www.instagram.com/nick_pedroza_/

Behind The Wheel Podcast: – Wheel Wednesday – New Wheels for 2020!

In this week’s “Wheel Wednesday” podcast Scott and Nick talk about the new wheels for 2020, when they are coming and why does it take longer for them to be available during launch years. Thank you for your support and for listening/watching!

And please, if you like the podcast and what we’ve been doing here, please SUBSCRIBE! We’re on iTunes, Google Play and we always put the full video interviews on our YouTube Channel ( https://www.youtube.com/konigwheels )

(we’d love if you subscribe there as well)! Thank you for listening!

For more info on NEW! wheel releases: konig2020.com

 

FOLLOW:

Scott Weiss (Konig) Instagram: @scott_Konig
https://www.instagram.com/scott_konig/

Nick Pedroza (Konig) Instagram: @nick_pedroza_
https://www.instagram.com/nick_pedroza_/

More on the Konig Behind The Wheel Podcast and to SUBSCRIBE:
https://konigwheels.compodcast

Play